Butterfly Pyramid

Description

Created with layers of clear and colour tinted resin, the stunning 5″ wide, 6″ tall pyramid is amazing to behold!

This piece was created painstakingly over several days, with special attention paid to each layer. The large double sided paper butterfly in the center can be seen from any angle (no real butterfly was used in this item). The colour tinted layers of resin were created with mica powders and glitters, keeping in mind the beautiful blues and purples found on the butterfly.

What to know about epoxy resin: Pieces completed in resin will have a hard glass-like finish and may be cleaned with a soft cloth and water or gentle cleaner. Because it is applied by hand and takes 24 hours to cure to the touch (72 hours for a hard cure), it is not uncommon for there to be some very slight imperfections in the resin finish. I like to refer to these imperfections as “personality” and they will not disrupt the integrity or beauty of the finished piece. It is common for resined pieces to acquire micro scratches with use. These will not harm the art and are just part of the nature of epoxy resin.

NOTE: Due to the weight of this piece, a separate quote will be required regarding the shipping cost.  Full cost, including shipping, will be required prior to shipping.